Author Topic: XML questions and answers  (Read 69314 times)

Offline ptarth

  • Arcen Volunteer
  • Hero Member Mark III
  • *****
  • Posts: 1,166
  • I'm probably joking.
Re: XML questions and answers
« Reply #180 on: February 12, 2016, 09:37:30 pm »
Q: Why can't I mixed relative=true movement with relative=false movement patterns using uses_direct_location_control?
A: You can. But there is a catch. If your change statement contains time="0" and is immediately followed by another change statement, then the first one is ignored and the position of the entity prior to the first change statement is used. I'm guessing its because the second instruction overwrite the first instruction since no time has passed. In other words, you tell the entity to shift one way, then before it can do anything, you tell it to shift the other. The entity ends ignoring the first instruction. (Go Left, er, no I mean Right. RIGHT!).


Examples:
Code: [Select]
<change location="0,-100" time="0"/>
<change relative="true" location="100,0" time="0.75"/>

Result: Entity moves to the left 100 pixels from original position.

<change location="0,-100" time="0"/>
<wait time="0.01"/>
<change relative="true" location="100,0" time="0.75"/>

Result: Entity appears 100 pixels to the right of the original position. Then shifts 100 moves to the left ending up at the original position.

<change location="0,-100" time="0.01"/>
<change relative="true" location="100,0" time="0.75"/>
Result: Entity moves very quickly to 100 pixels to the right of the original position. Then moves 100 moves to the left ending up at the original position.

I hope this reduces the amount of time you spend wandering the halls cursing Keith.
Note: This post contains content that is meant to be whimsical. Any belittlement or trivialization of complex issues is only intended to lighten the mood and does not reflect upon the merit of those positions.

Offline ptarth

  • Arcen Volunteer
  • Hero Member Mark III
  • *****
  • Posts: 1,166
  • I'm probably joking.
Re: XML questions and answers
« Reply #181 on: February 12, 2016, 10:24:37 pm »
Q: Anything I should know about spawning Bosses, Minibosses, and Condemned Bosses?
A: If you define the spawn location in the game entity room tag using boss_spawn_point, DO NOT USE 0,0. The engine self-destructs and may cause your computer to explode. Don't do it. Using "0,1" or "1,0" or "1,1" or "-1,-1" are all fine. (I think I haven't tested them).

Hopefully this will reduce the amount of time you spend wandering the halls cursing at Keith.
Note: This post contains content that is meant to be whimsical. Any belittlement or trivialization of complex issues is only intended to lighten the mood and does not reflect upon the merit of those positions.

Offline Misery

  • Arcen Volunteer
  • Core Member Mark V
  • *****
  • Posts: 4,109
Re: XML questions and answers
« Reply #182 on: February 12, 2016, 11:46:07 pm »
Hopefully this will reduce the amount of time you spend wandering the halls cursing at Keith.

I'm detecting a theme here.

Offline keith.lamothe

  • Arcen Games Staff
  • Arcen Staff
  • Zenith Council Member Mark III
  • *****
  • Posts: 19,505
Re: XML questions and answers
« Reply #183 on: February 12, 2016, 11:48:15 pm »
Hopefully this will reduce the amount of time you spend wandering the halls cursing at Keith.

I'm detecting a theme here.
It is an admirable, if futile, goal.
Have ideas or bug reports for one of our games? Mantis for Suggestions and Bug Reports. Thanks for helping to make our games better!

Offline ptarth

  • Arcen Volunteer
  • Hero Member Mark III
  • *****
  • Posts: 1,166
  • I'm probably joking.
Re: XML questions and answers
« Reply #184 on: February 12, 2016, 11:56:25 pm »
See, Keith is such a great guy, and I know there are really good reasons for things be done in a certain way. And sometimes there are going to be idiosyncratic features. Obviously he knows about them. But no one ever wrote them down to be passed along to us poor suckers trying to work through this. At least not all of them. And sometimes we get passed outdated or not quite complete information.

And then I usually end up whimpering in a corner. So much time was spent trying to figure out why that train boss was going diagonally instead of orthogonal.
Note: This post contains content that is meant to be whimsical. Any belittlement or trivialization of complex issues is only intended to lighten the mood and does not reflect upon the merit of those positions.

Offline keith.lamothe

  • Arcen Games Staff
  • Arcen Staff
  • Zenith Council Member Mark III
  • *****
  • Posts: 19,505
Re: XML questions and answers
« Reply #185 on: February 13, 2016, 12:03:11 am »
See, Keith is such a great guy, and I know there are really good reasons for things be done in a certain way.
Neither of these things is true.

Quote
And sometimes there are going to be idiosyncratic features.
That's true.

Quote
Obviously he knows about them.
That's only occasionally true.

Quote
But no one ever wrote them down to be passed along to us poor suckers trying to work through this.
No information was purposely withheld, is all I can plead :) This is our first time trying to have "real" modding that's not done via some editor or otherwise limited to a pretty specific subset of the game. Any time I added a tag or attribute needed by a content guy I put it in the wiki, but we're finding out that this is woefully inadequate :)
Have ideas or bug reports for one of our games? Mantis for Suggestions and Bug Reports. Thanks for helping to make our games better!

Offline ptarth

  • Arcen Volunteer
  • Hero Member Mark III
  • *****
  • Posts: 1,166
  • I'm probably joking.
Re: XML questions and answers
« Reply #186 on: February 13, 2016, 12:16:50 am »
From a bang your head on it until it breaks works perspective, most of the XML works pretty well. The major problems are finding things in the Wiki (e.g., Ricochet!), the few parts that just don't work (e.g., PeriodicMovementMode), and the awkwardness on where and how specific characteristics are made (at the level of the game entity, system, bullet, or bulletpattern), (e.g., the speed of a shot is defined at the system, most of the time). There are some deprecated and missing entries still (Ability Points, anything about floors.xml and particles), but they aren't that big of deal. Getting grep to work on my local install and getting a copy of the wiki helped a ton too.

Its just when I want to do something Ptarthian that things are troublesome. It would probably also help if I managed to get the NonSim parts down.
Note: This post contains content that is meant to be whimsical. Any belittlement or trivialization of complex issues is only intended to lighten the mood and does not reflect upon the merit of those positions.

Offline ptarth

  • Arcen Volunteer
  • Hero Member Mark III
  • *****
  • Posts: 1,166
  • I'm probably joking.
Re: XML questions and answers
« Reply #187 on: February 13, 2016, 07:18:49 pm »
Q: How does the teleporter shot destruction on use work?

I'm trying something new with the Reanimator, but when the teleporter is used it keeps wiping out the defensive barrier around it. I know that Misery did some hijinks with the new final boss regarding teleporters.
Note: This post contains content that is meant to be whimsical. Any belittlement or trivialization of complex issues is only intended to lighten the mood and does not reflect upon the merit of those positions.

Offline Hearteater

  • Core Member
  • *****
  • Posts: 2,334
Re: XML questions and answers
« Reply #188 on: February 13, 2016, 07:26:14 pm »
Question: as far as I can tell, you cannot control the facing of a shot sprite. It will always face in the direction it is traveling. You can fake this if you just want it to travel backwards with negative speed. But if you want it to travel along say angle 0, but be turned to face angle 30, you need to attach it to another invisible shot? Is that correct? Or is there a facing attribute on bullet I'm missing?

Offline Ayrix

  • Newbie Mark III
  • *
  • Posts: 42
Re: XML questions and answers
« Reply #189 on: February 13, 2016, 09:13:50 pm »
Question: as far as I can tell, you cannot control the facing of a shot sprite. It will always face in the direction it is traveling. You can fake this if you just want it to travel backwards with negative speed. But if you want it to travel along say angle 0, but be turned to face angle 30, you need to attach it to another invisible shot? Is that correct? Or is there a facing attribute on bullet I'm missing?
shots generate facing the angle you chose (movement direction is not tied to rotation), so you want to spawn them at angle 30, then immediately change movement direction.
Also never_changes_angle_after_spawn on the shot entity.
« Last Edit: February 13, 2016, 09:23:00 pm by Ayrix »

Offline ptarth

  • Arcen Volunteer
  • Hero Member Mark III
  • *****
  • Posts: 1,166
  • I'm probably joking.
Re: XML questions and answers
« Reply #190 on: February 14, 2016, 01:20:12 am »
Q: How can I kill the minions after the boss dies?
A: There are many ways.

One way is in the Invader Boss. He has a only_fires_on_death weapon that nukes everything around him (obstacles, enemies, shots).

Another way is to copy a suicide system to the appropriate entities.

Code: [Select]
##On boss entity
<system type="TakeBallAndGoHomeSystem" offset="0,0"/>

##System defintions
<system name="SuicideSystem"
category="Weapon"
shot_type="Invisible"
damage_type="Energy"
attack_power="1"
fire_rate="2000"
cue_time = "0.0"
range_actual="10"
shots_per_salvo="1"
shot_speed="0"
targeting_logic="Dumbfire"
firing_timing="AllTheTime"
image_name="Invisible"
destroys_firing_entity="true"
>
</system>

<system name="TakeBallAndGoHomeSystem"
category="Weapon"
shot_type="Invisible"
damage_type="Energy"
attack_power="1"
fire_rate="2000"
cue_time = "0.0"
range_actual="10"
shots_per_salvo="1"
shot_speed="0"
targeting_logic="Dumbfire"
firing_timing="AllTheTime"
image_name="Invisible"
only_fires_on_death="true"
>
<effect timing="OnUse" targeting="AllEnemies" type="AddSystem" related_systems="SuicideSystem"/>
</system>

*Note: These might be able to be cleaned up by making it a DirectUseSystem instead of a weapon.
Note: This post contains content that is meant to be whimsical. Any belittlement or trivialization of complex issues is only intended to lighten the mood and does not reflect upon the merit of those positions.

Offline ptarth

  • Arcen Volunteer
  • Hero Member Mark III
  • *****
  • Posts: 1,166
  • I'm probably joking.
Re: XML questions and answers
« Reply #191 on: February 14, 2016, 01:25:46 am »
Q: Independent shot angle and movement
A2: Using a bullet with uses_direct_location_control="true" and specifying relative locations (or not relative, your choice) will also work. There is also some nonsim code that allows you to animate a shot, including rotational shifts, but I've never worked with it.
Note: This post contains content that is meant to be whimsical. Any belittlement or trivialization of complex issues is only intended to lighten the mood and does not reflect upon the merit of those positions.

Offline ptarth

  • Arcen Volunteer
  • Hero Member Mark III
  • *****
  • Posts: 1,166
  • I'm probably joking.
Re: XML questions and answers
« Reply #192 on: February 14, 2016, 01:30:59 am »
Q: What are the specifications for the boss (and miniboss) mid room spawning for the player?
Note: This post contains content that is meant to be whimsical. Any belittlement or trivialization of complex issues is only intended to lighten the mood and does not reflect upon the merit of those positions.

Offline Ayrix

  • Newbie Mark III
  • *
  • Posts: 42
Re: XML questions and answers
« Reply #193 on: February 14, 2016, 02:13:17 am »
Q: What are the specifications for the boss (and miniboss) mid room spawning for the player?
You start at the test start location of the room don't you?


Also a Q
Does destroys_firing_entity count as a kill or not i.e. does it trigger on death effects?
Having fun trying to clear up my thing that endlessly respawns itself, needs to go *poof* without dying.

Offline ptarth

  • Arcen Volunteer
  • Hero Member Mark III
  • *****
  • Posts: 1,166
  • I'm probably joking.
Re: XML questions and answers
« Reply #194 on: February 14, 2016, 02:24:11 am »
Q: Does destroys_firing_entity count as a kill or not i.e. does it trigger on death effects?
Having fun trying to clear up my thing that endlessly respawns itself, needs to go *poof* without dying.

Yes. You can actually have enemies that propagate from having multiple destroys_firing_entity  and on_death effects. I found that out the hard way after my enemies started multiplying.
Note: This post contains content that is meant to be whimsical. Any belittlement or trivialization of complex issues is only intended to lighten the mood and does not reflect upon the merit of those positions.